8×170 Deep Dish Forged Wheels by TH WHEELS are made-to-order rims for pickup truck and custom vehicle projects. Listed configurations are 24×14, 26×10, 26×12, 26×14, 28×10 and 28×12, with 8×170 mm as the primary PCD. The supplied specifications also reference 6×139.7 mm, 8×180 mm and custom bolt patterns, all subject to separate engineering approval.
-
- TH WHEELS 8×170 Deep Dish Forged Wheels 24×14 26×10-14 28×10-12
-
- TH WHEELS 8×170 Deep Dish Forged Wheels 24×14 26×10-14 28×10-12
8×170 Deep Dish Forged Wheels for Custom Trucks
These 8×170 Deep Dish Forged Wheels combine forged construction with a customer-drawing design process. The deep-dish profile is not one fixed depth across every size. Dish depth changes with wheel width, mounting pad position, brake clearance, suspension geometry, center bore and approved ET. An aggressive offset can move the wheel farther outward, so appearance must be balanced against steering, bearing, body and legal-clearance requirements.
The selected range covers 24, 26 and 28 inch diameters with 10J, 12J and 14J widths. These wide configurations support street trucks, show builds, lowered projects and selected lifted applications, but neither diameter nor bolt count proves fitment on its own.
8×170 Deep Dish Forged Wheels Key Features
- Forged aluminum-alloy construction for a custom performance wheel project
- 24, 26 and 28 inch diameter options
- 10J, 12J and 14J widths in six listed configurations
- 5-, 6- and 8-hole layouts subject to engineering approval
- 8×170 mm primary PCD
- 6×139.7 mm, 8×180 mm or custom PCD options require separate approval
- Deep-dish styling developed from the approved customer drawing
- Custom color and finishing options
- MOQ of one piece
- Three-year warranty term supplied for this listing; final scope must be contractual
F-Series and Silverado Truck Fitment
F-150, F-250, F-350, F-450, Silverado 1500 and Silverado 2500 are project references assembled from the supplied title and item data, not universal fitment guarantees. The source spelling “Silvera” is normalized to Silverado. Vehicle generations, axle ratings, brake packages, stud patterns, hub pilots and suspension clearances can differ substantially, so measured fitment data is mandatory.
Before quotation, provide the vehicle manufacturer, model, production year, exact trim, drivetrain, front or rear axle position, original wheel and tire size, PCD, center bore, offset, brake package, suspension changes and intended load. Modified, lifted, lowered, wide-body or dual-rear-wheel vehicles need additional measurements and may require a physical clearance template.
For background on the relationship among diameter, width, bolt pattern, center bore and offset, see Wikipedia’s overview of wheel sizing. A matching PCD does not confirm that the rim will clear the brake caliper, seat correctly on the hub or remain inside the bodywork.
6061-T6 Aluminum and Forged Construction
The supplied material wording includes “Aluminum Alloy 6061–T” and “T6061-T,” which are incomplete temper designations. This listing normalizes the requested material to 6061-T6 aluminum alloy, but the final alloy and heat-treatment certificate must confirm that specification before production. General alloy background is available in Wikipedia’s 6061 aluminum alloy article.
Forging shapes the starting material under pressure before CNC machining creates the final mounting surfaces, windows and spoke geometry. Final strength depends on alloy verification, heat treatment, engineering, machining, inspection and application-specific testing. Wikipedia’s general article on forging explains the process but does not certify this product.
Engineering the Deep-Dish Profile
A dramatic lip must be designed around the actual vehicle. The supplier should verify mounting-pad thickness, inner-barrel clearance, spoke-to-caliper clearance, hub engagement, valve location, fastener seat and load requirement. Wide 12J or 13J wheels and aggressive negative offsets may require suitable tires, body modifications and revised suspension clearance.
Ask for a final two-dimensional cross-section or three-dimensional assembly drawing showing PCD, CB, ET, width, diameter, dish depth, brake envelope and load rating. Do not approve production from a styling image alone. The signed drawing should be the controlling fitment document for these 8×170 Deep Dish Forged Wheels.
Customization, Warranty and Packaging
Color, surface finish, PCD, CB, ET, width, diameter and hole count are customizable within engineering limits. The requested warranty term is three years. Because one screenshot shows a different period, the sales contract must state the binding structural and finish coverage, exclusions, installation requirements, claim procedure and effective period.
The available packaging reference is one wheel per package, approximately 60 × 60 × 31 cm and 20.0 kg gross. Actual measurements and weight will vary across 24-28 inch diameters and 10J-14J widths. Request the final packing list before arranging freight, especially for wide or large-diameter orders.
Send the full vehicle data, desired wheel size, design reference, finish, quantity and destination through the TH WHEELS contact page. Compare other options in the forged-wheel collection or return to the TH WHEELS website.
Installation and Safety
Professional installation is required. Confirm the approved tire size, bead compatibility, tire load and speed rating, hub seating, fastener type, thread engagement, tightening torque, brake and suspension clearance, wheel balance and safe body clearance. Recheck fastener torque after initial use according to the installer’s approved procedure.
Large-diameter or aggressive-offset wheels can change steering feel, scrub radius, braking response, bearing loads and tire clearance. Local road regulations, vehicle load requirements and insurance conditions should be checked before installation. Never use an unapproved wheel merely because its bolt holes align.
8×170 Deep Dish Forged Wheels Specifications
| Brand | TH WHEELS |
|---|---|
| Construction | Forged |
| Material | 6061-T6 aluminum alloy; confirm material certificate |
| Configurations | 24×14, 26×10, 26×12, 26×14, 28×10, 28×12 |
| Hole | 5, 6 or 8 |
| PCD | 8×170 mm primary; 6×139.7 mm, 8×180 mm or custom options |
| ET / CB | Customizable |
| Design | Deep dish / customer drawing |
| Color / Finish | Customizable |
| Vehicle References | F-150, F-250, F-350, F-450, Silverado 1500, Silverado 2500 |
| MOQ | 1 piece |
| Warranty | 3 years; confirm contract scope |
| Certification References | TUV, JWL, VIA, TS16949; request applicable documents |
| Package Reference | Single item; 60 × 60 × 31 cm; 20.0 kg gross |
| Condition | New |
| Place of Origin | China |
8×170 Deep Dish Forged Wheels FAQ
Does selecting 5, 6 or 8 holes guarantee fitment?
No. Hole count, PCD, CB, ET, fastener seat, brake clearance and load rating must all match the approved vehicle data.
Can the lip depth be chosen independently?
No. The achievable lip is calculated from width, offset, brake clearance and structural requirements.
Is 6061-T6 confirmed?
It is the normalized requested specification for this listing. Require the final material and heat-treatment certificate before production.
What is the warranty period?
The requested listing term is three years, subject to the scope and conditions written in the binding sales contract.
