3 Piece Carbon Fiber Rims by TH WHEELS are custom black performance wheels combining the carbon-fiber material stated in the product data with forged aluminum-alloy elements referenced in the product title. The modular three-piece concept supports project-specific sizing and finish development for high-performance vehicle builds, subject to an approved engineering drawing.
-
- Custom 3 Piece Carbon Fiber Rims Aluminum Alloy Forged Wheels for M3 911Gts Huracan EVO Lp600 Gallardo F458 488 F8 SF90 R8
-
- Custom 3 Piece Carbon Fiber Rims Aluminum Alloy Forged Wheels for M3 911Gts Huracan EVO Lp600 Gallardo F458 488 F8 SF90 R8
-
- Custom 3 Piece Carbon Fiber Rims Aluminum Alloy Forged Wheels for M3 911Gts Huracan EVO Lp600 Gallardo F458 488 F8 SF90 R8
Premium 3 Piece Carbon Fiber Rims
These 3 Piece Carbon Fiber Rims are offered in 19, 20, 21 and 22 inch diameters with widths from 8J to 13J. Listed five-lug PCD choices are 5×120, 5×112, 5×130, 5×120.65, 5×114.3 and 5×108 mm. Supplied offset choices are ET20, ET25 and ET30. Every diameter, width, PCD and offset combination is not automatically available or compatible.
The source describes the design as both concave and deep dish. The final face profile, lip depth and brake clearance depend on diameter, width, offset, hub geometry and vehicle packaging. Buyers should approve a dimensioned drawing showing the complete wheel section before production rather than relying only on appearance images or general specifications.
Key Features of 3 Piece Carbon Fiber Rims
- Three-piece modular wheel construction
- Forged construction stated in the supplied product data
- Carbon-fiber and aluminum-alloy material concept
- Black color with customizable finishing
- Concave and deep-dish design direction
- 19, 20, 21 and 22 inch diameter options
- 8-13J width range
- Six listed five-lug PCD options
- ET20, ET25 and ET30 offset choices
- Three-year warranty stated in the supplied information
High-Performance Vehicle Fitment
M3, 911 GTS, Huracan EVO, LP600, Gallardo, F458, 488, F8, SF90 and R8 are application references supplied with the product title. They do not guarantee direct fitment. Each vehicle family includes different generations, trims, brake packages, axle loads, center bores, widths and offsets. Front and rear wheels may require different specifications.
For exact fitment, provide the vehicle manufacturer, model, production year, trim, drive configuration, axle position, original wheel and tire size, PCD, center bore, offset, brake package and required wheel load rating. Include details of suspension, brake, hub or body modifications. TH WHEELS is an independent aftermarket supplier; vehicle and model names are used only as fitment references.
A matching bolt pattern alone is insufficient. Center bore, bolt-seat type, fastener engagement, brake-caliper clearance, suspension clearance, fender clearance, tire size and load capacity must be reviewed together. Learn more about general wheel sizing terminology before approving a custom specification.
Carbon Fiber and Forged Aluminum Construction
The supplied information uses both “Carbon Fiber” and “Aluminum Alloy Forged Wheels.” This listing therefore describes a mixed-material three-piece concept, but it does not assume which exact section is carbon fiber or aluminum. The approved bill of materials and drawing must identify the center, inner barrel, outer rim, fasteners, sealing system and surface finish.
Carbon fiber can provide high stiffness relative to mass, while forged aluminum can deliver controlled strength and machinability when engineered correctly. Actual weight, load capacity, impact performance and fatigue life depend on the finished configuration. Wikipedia provides general background on carbon-fiber-reinforced polymers and the forging process; these sources do not certify this wheel.
Customization and Finish Approval
The product selector shows black as the requested color, while finishing is listed as customizable. Minor, drawing-based, sample-based and full customization capabilities are shown. The customization panel states a four-piece minimum for design customization; this should not be interpreted as the base product MOQ unless the quotation confirms it.
Color, carbon weave orientation, gloss level, exposed hardware, center profile, lip depth and other visible details should be documented in the order. Physical samples or approved finish references are recommended because carbon weave and black surfaces can look different under studio lighting, daylight and screen reproduction.
Explore the TH WHEELS forged-wheel collection, visit the TH WHEELS website, or send vehicle data through the contact page for an engineering review.
Warranty, Packaging and Installation
A three-year warranty is stated in the supplied product information. Confirm the binding coverage, finish exclusions, structural claim process and required inspection records in the sales contract. The listed selling unit is one item, with a package size of 60 × 60 × 30 cm and a gross weight of 18.0 kg. Packaging and weight may change with the final diameter, width and construction.
Installation must be completed by a qualified wheel and tire professional. Confirm hub seating, wheel fasteners, torque, tire size, valve equipment, brake and suspension clearance, rotation and balance before driving. Multi-piece wheels also require maintenance according to the approved manufacturer instructions. Never disassemble, reseal or retorque assembly hardware without the correct procedure and authority.
3 Piece Carbon Fiber Rims Specifications
| Brand | TH WHEELS |
|---|---|
| Construction | Three-piece forged wheel |
| Material | Carbon fiber / aluminum alloy |
| Diameter | 19, 20, 21, 22 inch |
| Width | 8-13J |
| Hole | 5 |
| PCD | 5×120, 5×112, 5×130, 5×120.65, 5×114.3, 5×108 mm |
| ET | 20, 25, 30 mm |
| Design | Concave / deep dish |
| Color | Black |
| Finish | Customizable |
| Purpose | Retrofit / performance upgrade |
| Warranty | 3 years |
| Design Customization MOQ | 4 pieces |
| Package | Single item; 60 × 60 × 30 cm; 18.0 kg gross |
| Condition | New |
| Place of Origin | China |
3 Piece Carbon Fiber Rims FAQ
Do these wheels directly fit every listed vehicle?
No. The vehicle names are custom-project references. Exact year, trim, axle position, brakes, PCD, CB, ET, width and load rating must be approved.
Which parts are carbon fiber and aluminum?
The source does not define each component. Request the final bill of materials and drawing before placing the order.
Which sizes are listed?
The selector shows 19, 20, 21 and 22 inch diameters, with an 8-13J width range.
Is four pieces the product MOQ?
Four pieces is shown for design customization. Confirm the base product MOQ in the quotation.
